• PayRange PayStation Mini & power cord
• Smartphone with PayRange mobile app
• 110V outlet power source
• Outlet splitter
• Phillips screwdriver and cordless drill
• 1/4” masonry drill bit (cement wall mounting)
• 1/4” standard bit
• Mounting hardware: screws, plastic wall anchors and
• grommet covers

• Remove PayStation Mini from its packaging.
• Remove the two screws positioned at the bottom left and right sides of the PayStation Mini and remove the back mounting panel.
• Write down Device ID, PIN, and Serial number from the label on the back of the machine. You’ll need these for PayStation registration in the next steps.
• Refer to CSC PayStation placement guidelines for mounting height.
• Place PayStation Mini back mounting panel on the wall and mount it securely using the included mounting hardware.
• Attach the PayStation Mini to the mounting panel, align it, then insert and tighten the two screws on the bottom left and right to secure it in place.
• Plug PayStation Mini power cord into a 110v power supply.
• Ensure it powers ON and the home screen is displayed.
• Follow on-screen instructions for remaining installation and set-up.
• Affix PayStation signage to wall according to CSC signage placement guidelines.

Plug in the PayStation and wait for the Registration screen to appear. Open the PayRange app. Tap the QR code icon, then scan the PayStation QR code displayed on the kiosk screen to begin registration process.

Open the PayRange app. Tap the QR code icon, then scan the PayStation QR code displayed on the kiosk screen to begin registration process.

Locate the 8-digit Device ID and the 4-digit PIN. Both numbers are printed on the label on the back of the PayStation Mini. You will need these numbers to register the PayStation Mini.

From the app menu, select “Register Device.” Enter the 8-digit Device ID into the “Serial” field and the 4-digit PIN into the “PIN” field.

Tap camera icon to scan a machine ID (the actual machine license plate tag) for any machine located in the same room you are installing the PayStation Mini.

Position the Machine License tag inside the camera frame until it is fully visible and the app registers the scan.

Click “Register”. A prompt should appear on the screen indicating successful registration. Tap “Okay”.

The PayStation screen will display “One Tap Away.” Tap on “Tap Get Started” — the available machines in the room will appear for selection and payment options.

Confirm all the machines in the room appear on the display.

Use the PayStation’s onscreen prompts to select a machine for the test payment.

You must test the PayStation’s communication by sending a test payment to a machine. The connection should complete within 3–10 seconds.

1. Power off the PayStation, BluKey Connect, & CSC router.
2. Leave all devices off for 30 seconds.
3. Power on the CSC router and wait 60 seconds.
4. Power on the BluKey Connect and wait another 60 seconds.
5. Power on the PayStation and test again.
6. If the PayStation still cannot connect to the Internet, address the room-specific connectivity issue by using a different router or an Ethernet connection.